AIRJET Air Piston Pump ZH7
High vacuum and large flow rate. Strong adaptability to environment. High quality and exellent performance. Energy saving and high efficiency. No leakage and smooth operation. Strong suction and high vacuum. High pressure. Innovative designs and easy installation. High temperature performance, good consistency. Oil resistance and easy installation. DC brushless motor assembled.
AIRJETTM High Flow Air Pump DC Vacuum Pump Brushless Motor Drive Electric Piston Pump ZH7 Series
Features
- High vacuum and large flow rate.
- Strong adaptability to environment.
- High quality and exellent performance.
- Energy saving and high efficiency.
- No leakage and smooth operation.
- Strong suction and high vacuum.
- High pressure.
- Innovative designs and easy installation.
- High temperature performance, good consistency
- Oil resistance and easy installation
- DC brushless motor assembled
- Durable and long life span over 3000hours, low heat.
- Heavy duty work for 24 hours and Continuous operation
Application
- Electronic products,agriculture,finishing,light industry products
- Analytic-al instruments
- Chemical and production engineering
- Various ancillary equipment
- Medical Electronics: Blood pressure; negative pressure wound therapy device; oxygen machine; breast pump; the suction machine; ICU monitor; ozone disinfection; etc.
- Household appliance: Vacuum fresh juice machine; coffee machine; automatic tea; fragrance machines; dryers; fragrant Irons etc.
- Health Massage: Massage chair; neck massage; aquarium; beauty device etc.
| Model | ZH724-904-3800 |
| Size(mm) | 109*88.6*43.6 |
| Voltage(DC/V) | 24V |
| Power(W) | 28 |
| Pressure(Kpa) | 300 |
| Vacuum(Kpa) | 90 |
| Free Flow rate(L/M) for air | 21 |
| Weight(G) | 600 |
| Noise level(db) | 55db in one meter |
| Lifespan(hous) | >10000hours |
| Materials | PPS and Teflon |
| Inlet diameter and outlet diameter(mm) | ID:4.5mm OD:8.5mm |
| Model | ZH724-924-5000 |
| Size(mm) | 109*88.6*43.6 |
| Voltage(DC/V) | 24V |
| Power(W) | 48 |
| Pressure(Kpa) | 450 |
| Vacuum(Kpa) | 80 |
| Free Flow rate(L/M) for air | 35 |
| Weight(G) | 600 |
| Noise level(db) | 60db in one meter |
| Lifespan(hous) | >10000hours |
| Materials | PPS and Teflon |
| Inlet diameter and outlet diameter(mm) | ID:4.5mm OD:8.5mm |
3-wires motor connection
|
Power supply 20AWG 80℃ 1007 |
AWG 20 Black | GND | |
| AWG 20 RED | M+12~+25V | ||
|
PWM IN |
AWG 24 GREEN 1007 80℃ |
Recommended frequency | 20KHZ~35KHZ |
| High level input voltage | 1.8V~5.5V | ||
| Low level input voltage |
0V~1.65V TO GND SPEED MAX. |
||
| Hysteresis width | 0.3V~0.4V | ||
| High level input current | 65uA MAX. (PWM IN 5V) | ||
| Low level input current | -65uA~-95uA(PWM IN 0V) | ||
Cautions
- Do not use this product beyond the limit specified in this specification.
- When using the brushless motor, be noted that the input power should be constant pressure and filtering.
- Keep the inlet and outlet clean and smooth , no solid particles.
- May contain a small amount of water, not solid foreign objects into the pump body.
- In inlet and outlet of the non-clean,please install air intake filters.
- The specification of this product is only for your reference
- The specific details should check the real products.
- Products should be made according to customer’s request within the permitted range.
- Non-professional person should not disassemble this product.
- Long service life at room temperature environment.
- Can supply a variety of certifications according to customer’s requests.
- Please ensure the input voltage meets the specification and make sure the power polarities are connected properly.
- Connect a filter to the inlet to block dust, fiber,water drops when the operational environment is worse.
- Use φ4 silicone tube and Connect a silencer to the outlet for noise reduction purpose.
- Make ventilation holes or slots on the bottom or side of device housing for heat dissipating is strongly recommended.
- Use a piece of thick sponge or foam to wrap the pump for installation would reduce noise and vibration.
- To extend the life time, Suggest to design a control circuit include a pressure sensor to let the pump work in intervals.
- Pack and Store the pump well in clean, temperature and humidity controlled place to avoid rusting of motor.
