AIRJET Air Pump KDA67DCB Series
AIRJETTM Air Pump KDA67DCB Series DC 12V / 24V Electric Brushless Motor Assemblied High Vacuum Pump Dispositive Pressure -65KPA High Pressure Diaphragm Pump Positive Pressure 1.5Bar High Flow Mini Air Compressor 13L/Min
Product Label: SOVOFLO, AIRJET, Pump, Diaphragm Pump, Air Pump, Vacuum Pump, Mini Pump, Micro Pump, DC Pump, DC Diaphragm Pump, DC Air Pump, DC Vacuum Pump, Mini Diaphragm Pump, Mini Air Pump, Mini Vacuum Pump, Micro Diaphragm Pump, Micro Air Pump, Micro Vacuum Pump, Electric Pump, Electric Diaphragm Pump, Electric Air Pump, Electric Vacuum Pump, Brush Pump, Brushless Air Pump
Light weight Low Weight
Low noise level & vibration
Low Power and High efficiency
Can be mounted in any plane
DC Carbon Brush/Brushless Motor
Gas detection devices
Blood Pressure Monitor
Gas massage products
|Ambient temperature||0-40 ℃||0-40 ℃|
|Dimensions (LxWxH mm)||84.1*63.6*42.4mm||84.1*63.6*42.4mm|
- Can be mounted in any plane
- Applicable as vacuum pump or pressure pump
- Parts in contact with medium Option
- Pump head: PPS
- Piston, valves: PTFE and EPDM
Notes of micro air pump
- Do not use this product beyond the limit specified in this specification.
- When using the brushless motor, be noted that the input power should be constant pressure and filtering.
- Keep the inlet and outlet clean and smooth , no solid particles.
- May contain a small amount of water, not solid foreign objects into the pump body.
- In inlet and outlet of the non-clean,please install air intake filters.
- The specification of this product is only for your reference
- The specific details should check the real products.
- Products should be made according to customer's request within the permitted range.
- Non-professional person should not disassemble this product.
- Long service life at room temperature environment.
- Can supply a variety of certifications according to customer's requests.
- Please ensure the input voltage meets the specification and make sure the power polarities are connected properly.
- Connect a filter to the inlet to block dust, fiber,water drops when the operational environment is worse.
- Use φ4 silicone tube and Connect a silencer to the outlet for noise reduction purpose.
- Make ventilation holes or slots on the bottom or side of device housing for heat dissipating is strongly recommended.
- Use a piece of thick sponge or foam to wrap the pump for installation would reduce noise and vibration.
- To extend the life time, Suggest to design a control circuit include a pressure sensor to let the pump work in intervals.
- Pack and Store the pump well in clean, temperature and humidity controlled place to avoid rusting of motor.
Application of micro air pump
- Electronic products,agriculture,finishing,light industry products
- Analytic-al instruments
- Chemical and production engineering
- Various ancillary equipment
- Medical Electronics: Blood pressure; negative pressure wound therapy device; oxygen machine; breast pump; the suction machine; ICU monitor; ozone disinfection; etc.
- Household appliance: Vacuum fresh juice machine; coffee machine; automatic tea; fragrance machines; dryers; fragrant Irons etc.
- Health Massage: Massage chair; neck massage; aquarium; beauty device etc.